How to present leases under IFRS 16 in the statement of cash flows (IAS 7)

The new lease standard IFRS 16 has been here for a while and yes, it imposed a challenges on all companies who leased their assets under operating leases.

The reason is that IFRS 16 requires presenting ALL the leases in the same way, regardless whether they were classified as finance or operating.

Just for the lessees though and with some exceptions (small leases, short-term leases).

So, now, if you have any sort of a lease as a lessee, you have to present right-of-use asset and the lease liability. You can read more about it here and there are also detailed explanations with solved excel examples inside the IFRS Kit.

On top of challenges this new treatment brings, many of you asked me to show how to present these new leases in the statement of cash flows.

Hence let me show you on the solved example.
 

Example: IFRS 16 Leases in the statement of cash flows (IAS 7)

On 1 January 20X4, ABC entered into the lease contract. The details are as follows:

This transaction has been incorporated to financial statements as shown below.

Your task is to prepare the statement of cash flows for the year ended 31 December 20X4.

Special For You! Have you already checked out the  IFRS Kit ? It’s a full IFRS learning package with more than 40 hours of private video tutorials, more than 140 IFRS case studies solved in Excel, more than 180 pages of handouts and many bonuses included. If you take action today and subscribe to the IFRS Kit, you’ll get it at discount! Click here to check it out!
 

To prevent any misunderstanding, “CU” simply means currency unit (instead of mentioning EUR, USD, JPY, what have you).

Please note the following points in the presented financial statements:

 

Solution: Preparing the statement of cash flows

Before I start with actual steps of making this particular statement of cash flows, let me point you to one of my other articles in which I described all the steps with lots of details.

I always use this method of preparing statement of cash flows as it is simple, logical, easy to follow and always gives good results.

If you are unsure how to do that, I sincerely recommend reading that article first and watching the 14-minute video at the end of it with basic explanations of making statement of cash flows.

From now on, I am going to follow the exact same steps, so I will describe them just in short.
 

Step #1: Calculate changes in the statement of FP

Here, you will simply calculate the difference between opening balance and the closing balance of each individual item in the statement of financial position (FP).
A few tips:

This should look something like the following picture:

 

Step #2: Classify each change in FP to the statement of cash flows

Each change in the statement of FP affects the statement of cash flows somehow.

The point of this step is to assign each change in FP to the correct place within the statement of cash flows. Therefore:

  1. Take the blank statement of cash flows with no numbers;
  2. Go and classify each change in the correct place within the statement of cash flows, one by one, EXCEPT for cash and cash equivalents;
  3. Put the opening balance (20X3) of cash and cash equivalents to the line “Cash and cash equivalents at the beginning of the period”;
  4. Put the closing balance (20X4) of cash and cash equivalents to the line “Cash and cash equivalents at the end of the period”;
  5. Make the following check: sum of all changes without subtotals should give you the difference between the last 2 lines of your CF statement.

The following picture shows this step. I even pointed to 3 changes to illustrate what I meant by the classification of each change:

Do not worry if the numbers make no sense – that’s OK at this stage, they will make sense as we go further.

In relation to presenting your new leases in the statement of cash flows, please note:

 

Step #3: Deal with non-cash items

This is the crucial part to understand and get it right, especially in the case of leases under IFRS 16, because taking a lease is a non-cash item at the initial recognition.

Before we start actually working on adjustments for non-cash items, here are a few tips:

OK, for this example, let’s do just a few adjustments, namely the one for tax expense (which is universal crucial adjustment for ALL statements of cash flows), interest expense, depreciation and then all adjustments related to leases only (we will pretend there are no other adjustments.
 

Adjustment #3.1: Tax expense

You can see that currently, your CF statement starts with profit before tax, but in fact, there is a balance of CU 6 009 which is profit after tax in fact (just look at the statement of PL and OCI).

Therefore, we add back the tax expense of 2 500 to the first line and deduct it from the line “income taxes paid”.

If there were some unsettled income tax liabilities or deferred tax assets/liabilities, then you should adjust them as well, but let’s keep it simple here. You can always take a look at the IFRS Kit where you will learn all the details.
 

Adjustment #3.2: Interest expense

Interest expense always adjusts non-cash items in the operating part, therefore we add its amount of CU 1 491 accordingly to the line “Adjustments for: interest expense”.

The standard IAS 7equires presenting interest paid either in the operating part or in the financing part (well if you work for a bank or other financial institution, then you do not have this dilemma because it is clearly the operating part in most cases).

Let me also bring your attention to the requirement of paragraph 50 of the standard IFRS 16. It requires that you shall classify the cash payments for the interest portion of the lease liability separately in the statement of cash flows.

Therefore, I split the total interest paid into two parts:

As you can see below, I decided to classify the interest paid in the financing part rather than operating one, although you have a choice.
 

Adjustment #3.3: Depreciation

This is clearly non-cash item included in your profit, so you need to add it back in the line “Adjustments for: depreciation and amortization” in the operating part.

You should deduct it then from the same line item in which you reported the change in FP related to property, plant and equipment in the investing part.
 

Adjustment #3.4: Amortization of ROU asset

Again, this adjustment is of a very similar character as depreciation (#3.3).

You need to add the amount of CU 4 000 back in the “Adjustments for: depreciation and amortization” in the operating part.

Then, you deduct it in the same line in which you classified the change in ROU asset: Acquisition of PPE – ROU asset.
 

Adjustment #3.5: New leases

As I have mentioned above, acquisition of assets under the leases are non-cash item initially, therefore we need to adjust it.

Special For You! Have you already checked out the  IFRS Kit ? It’s a full IFRS learning package with more than 40 hours of private video tutorials, more than 140 IFRS case studies solved in Excel, more than 180 pages of handouts and many bonuses included. If you take action today and subscribe to the IFRS Kit, you’ll get it at discount! Click here to check it out!
 

So, initial change of ROU asset amounted to CU 20 000 (prior amortization), but ABC paid only CU 3 000 for the initial cost. The rest of it was new lease liabilities, that are also non-cash item.

Therefore, you need to cancel these 2 non-cash items, so you need to:

That’s it, we are done with non-cash items for leases.

It looks as follows:

 

Step #4: Add up

At this stage, you are almost done.

Just add up all the columns, line by line, to get the actual statement of cash flows.

For example, take a look at the line “Profit before taxation”. You need to add up all the numbers from all the columns in that line, in this case CU 6 009 plus CU 2 500, which is CU 8 509 – exactly as Profit before tax from your statement of PL and OCI.

On top of that, it would be nice to add subtotals to show totals for individual parts of statement of cash flows clearly.

I have done that for you, here you go:

 

Step #5: Perform final checks

Let’s take a look at some final numbers related to leases in the statement of cash flows to see if they make sense:

When you are preparing complex statement of cash flows, I also recommend verifying the movement of certain balance sheet items. I am not going to do that here in this article as the movements are clear enough from the statement, but if interested, check out this article again (step 6) or take a look inside the IFRS Kit.

The following video shows this process, so please check that out:

The excel file from this video is included in the IFRS Kit.

Any ideas or questions? Feel free to comment below. Thank you!

Related posts

Troubles with IFRS 16 Leases

by Silvia
8 years ago

Adopting IFRS 16 – What Is The Best Option For You?

by Silvia
5 years ago

Contract Asset vs. Trade Receivable – What’s the Difference?

by Silvia
3 years ago
Exit mobile version